DeutschEnglish (UK)
HomeProductsLifting Technology Cranes


Whith manual or elektro-hydraulic drive

KS BigFoot - a mini crane with a maximum comfort

As its name already suggests its advantages lie in the tires. By that it easily overcomes curbs and other rough ground conditions. Even with adhering load its wheels make all the movements on rough terrain. For this purpose it makes two large rubber wheels at the front and two smaller rears. The low rolling resistance at the solid rubber tires provide a maximum comfort when pushing and still has the advantage that flat feet are excluded. All KS BigFoots are constructed as a mobile mini crane with counterweights and - based on the construction - reduced to the essential. Therefore, you need at the site of operation little space and it can be mounted fast on smallest room. A crane arm and handle bar can be folded down easily, whereby not only the assembly, but also transportation to the construction site is very easy to organize.

For everyone who demands during the assembly more user-friendly comfort, we have equipped the KS BigFoot 450 H with an electric controlled hydraulic drive. With it the lifting height as well as lifting length can be controlled easily via a wired remote control. An accurately fitting and an accurately lifting of the load are guaranteed. This greatly facilitates the assembly and contributes to an efficient way of working.

Advantages

  • Small rooms usable by compact construction
  • Millimetre accurate putting down possible
  • Secure special hydraulic
  • Fast folded and ready to transport
  • Fit through every standard door
  • Easy to handle
  • Solid rubber tires for easy pushing over rough ground
  • Small turning circle
  • Electro-hydraulic height drive with cable remote control (optional at the KS BigFoot 450H)
  • Electro- hydraulic telescope with cable remote control (optional at the KS BigFoot 450H)
  • Crane arm in five length position adjustable
  • High-quality and secure by CE-certification

Technical Data

 

Type
KS BigFoot 280
KS BigFoot 450 KS BigFoot 450 H
Bearing load max. 250 kg 450 kg 450 kg
Bearing load in front of the wheels max. 190 - 280 kg 280 - 450 kg 280 - 450 kg
Outreach in front of the wheels max. approx. 1.135 mm approx. 965 mm approx. 965 mm
Lift height approx. 2.650 mm approx. 2.570 mm approx. 2.570 mm
Height drive Manual Manual Electro-hydraulic
Device measures (WxL) approx. 800 x 1.800 mm 800 x 1.800 mm 800 x 1.800 mm
Net weight  without counterweights approx. 145 kg approx. 160 kg approx. 195 kg
Counter weights 13 pcs. á 22 kg 13 pcs. á 22 kg 9 pcs. á 22 kg
Standard equipment Incl. hook, 360° rotating Incl. hook, 360° rotating Incl. hook, 360° rotating
Optional equipment

4 suction units hand pumps 
KS VacuPower

4 suction units hand pumps
KS VacuPower
4 suction units hand pumps 
KS VacuPower
High power battery

Without

Without 12 Volt (230 Volt)
 


Secure special hydraulic for millimetre accurate putting down     

KS GK - the powerful one

The hydraulic light construction crane KS GK is used as load crane in the conventional sense. On the other hand it is perfectly suited for verification of large, heavy panes. From an ergonomic point of view it is a valuable support. The construction as “counterweight crane” allows a free outreach ahead the wheels. This is particularly hard to reach areas or in assembly situations that cannot be run, a real advantage, such as storage rack and spurs. At a maximum outreach of 1.350 mm overcomes the KS GK to put a flower bed and it manages to secure the panes to lift up to the window reveal. The static load capacity lays on the KS GK at the best at a bearing load of 500 kg.

The crane arm is manual adjustable in five length positions. The lift height is controlled by a hydraulic hand pump. The putting down of the load can also be adjusted at a rotating wheel, so that a millimetre-accurate location of the pane is possible. The easy construction combined with four ball-bearing solid rubber wheels provides for a good movement of the KS GK and makes a routing in a confined space. Fixing brakes provides on all four wheels the necessary security.

Advantages

  • Usable in small rooms by compact construction
  • Millimetre accurate putting down possible
  • Secure special hydraulic
  • Quickly folded and ready for transport
  • Fits through every standard door
  • Easy to operate
  • Small turning circle
  • Crane arm adjustable in five length positions
  • High quality and secure by CE-certification

Technische Informationen

Type
KS GK 330
KS GK 500
Bearing load max. 330 kg 500 kg
Bearing load in front of the
wheels max.
250 - 330 kg 250 - 500 kg
Outreach in front of the
wheels max.
1.350 mm 1.350 mm
Lift height 2.760 mm 2.760 mm
Height drive manual manual
Device dimension 760 x 1.650 x 1.700 mm 760 x 1.650 x 1.700 mm
Net weight without counter weights 130 kg 135 kg
Counter weights 13 pcs á 22 kg 26 pcs á 22 kg
Standard equipment Incl. hook, 360° rotating Incl. hook, 360° rotating
Optional equipment

4 suction units hand pumps
KS VacuPower

4 suction units hand pumps
KS VacuPower
 
©2013 - K. Schulten GmbH & Co. KG - Industriestraße 3-7 48488 Emsbüren